Start your sewing adventure with us.    Join Seamwork Now

Articles on this site were all published prior to 2017 and this site is no longer updated. Please visit our current Articles, Patterns, and Classes for the most up-to-date content and products.

How to match plaids and stripes


When we designed Dahlia, one of the features that excited me most was how great it would look in plaids and stripes.

The use of small gathers instead of darts, the raglan sleeve, and the inset waist all really enhance the effect of plaids and would look equally awesome in striped fabric. But there are a few things to keep in mind when making any garment in a striped or plaid fabric.




Here’s version 1 of Dahlia in a soft, lightweight wool flannel with a large plaid pattern. I did my best to match the plaid wherever I could.



Stripe and plaid matching seems tricky, but almost all of it happens in the cutting phase, giving you a chance to play around with your pieces until things look exactly right.

Use these tips, whether you’re sewing up Dahlia or anything else.

Purchasing fabric


Because plaids and stripes require exact placement of the pattern pieces, you almost always need a little extra fabric.

The rule of thumb is that for small plaids, get at least an extra 1/2 yard, and for large plaids go with up to an full extra yard. This is usually enough to cover you, but I like to be safe instead of sorry.

Decision time


Before you start, make a decision about where it’s most important to have your plaids match.

It’s often impossible to match every single line. For example, depending on the size and scale of a stripe or plaid, it may be impossible to match your plaid both at the armhole and also at the side seams, just due to the way you must lay and cut your pieces.

I rank the importance of seams by how visible they are. Here’s a rough idea of how I’d rank the importance of matching some common dress seams:

  1. Center front and center back. If there is a seam going up the front or back, these should always be matched. Thankfully, this is extremely easy because the pieces are mirrored. All you have to do is lay your fabric correctly (see the laying section below).
  2. Armhole and sleeve. This is trickier to match because of the curves, but it’s highly visible.
  3. Waistline. This is also highly visible. It’s usually not difficult to match both the waistline and the armhole. If your garment has an inset midriff (like the Dahlia dress), another alternative is to cut the midriff on the diagonal (bias). This creates a cool effect and obviates the need for matching several pieces at once.
  4. Side seams. If there are no sleeves, you might want to match the side seams so that the stripes or plaids go around the body in a continuous line.
  5. Shoulders. Matching a plaid at the shoulder can provide a nice little detail.

For this dress, I’ll be concentrating on matching the sleeve, since there is no center front or center back seam.

Bias cutting


Once you’ve decided on a main seam or seams to match, decide if you want to change the direction of any pattern pieces.

If you’re using plaid and your pattern has a lot of pieces, cutting some of them on the bias instead of straight will look good and keep you from going insane trying to match multiple seams at once.

If this seems like cheating to you, take a look at almost any man’s plaid shirt. Often, the back yoke, pockets, and plackets are cut on the bias. It just looks better, and draws attention to the lines of the garment instead of obscuring them.

The same goes for stripes, except you have even more options. You can cut some pattern pieces on the bias, or change the direction of the stripes for another effect.

For the Dahlia, I’ve cut the front and back midriff on the bias, which I highly recommend. If you’re making the sleeveless version with the paneled skirt, you may want to change the direction of the center skirt panels too.


Draw in a new grainline on these pieces, at 45 degrees to the original grainline.

You will need to cut these pieces on a single layer, then flip them along the center, since you are no longer cutting on the fold.

Drawing match stripes

So now we’ve decided that the main seam to match on this dress is the sleeve.

Dahlia has a raglan sleeve, but this works with a set in sleeve as well.


First, draw in the seam allowance on all the pattern pieces, including the sleeve.

The reason for this is that you want your stripes to match at the seam where they are sewn, NOT at the raw edge. With curved and diagonal seams like this, a stripe can easily match at the raw edge, but not at the actual seam.


Mark a point along the seamline of the front of the sleeve where you would like to have a stripe meet the bodice. Usually about halfway up the sleeve cap is good, because it’s a visible spot.

Use a pen and a ruler to draw a line on the sleeve from this point all the way across to the other side. Make sure the line is perpendicular (90 degrees) to the grainline.


Walk the bodice front with the sleeve along the seamline, beginning at the underarm.


When you get to the point you marked on the sleeve seamline, stop. Stick a pin through to mark this point on the bodice as well. On my pattern, this is where the red line meets the blue line.


Draw another line from the point you marked with the pin across the bodice front. Again, this should be perpendicular to the grainline.


Now, you’re going to repeat this for the bodice back.

Walk the sleeve and bodice back together, beginning at the underarm.

When you reach the match stripe, mark again with a pin.


Draw another match stripe across the bodice back, from the point through to the other side. Again, this should be perpendicular to the grainline.

Now your sleeve is all nicely marked for cutting.

Laying fabric


Lay your fabric out and align the selvages, as usual.

You may want to adjust the fold of the fabric if you are using a plaid and will be cutting any pieces on the fold. You probably want your plaid to be symmetrical on the bodice, so make sure the fold is in a spot you’re comfortable with. Cutting a plaid dress only to realize your stripes aren’t centered is a big bummer.


Carefully pin the selvages together, matching the stripes. Smooth out the fabric to make sure there are no lumps. If you’ve adjusted the fold, the selvages may not be exactly lined up, but the stripes should still be.

Laying pieces


Lay the bodice front and back pieces on the fold, aligning the match stripes with a prominent line on the fabric. Make sure the match stripes on each piece align with the same type of line in the plaid.

Cut these pieces out.


Next, lay the sleeve piece. Again, align the match stripe carefully with the same type of line in the plaid. You may need to play around with the placement, which is why this can take a little extra fabric to get right.


If you’re just matching horizontal stripes, you can skip this step. But if you’re matching a medium or large plaid, you might want to mirror the plaid at the armhole. Otherwise, the horizontal stripes of the plaid will match fine, but not the vertical ones.

To do that, lay your front bodice on top of the sleeve piece, matching up the armhole edges. Now slide the sleeve left or right, until the plaids form a continuous pattern. Notice how the plaid looks unbroken?

Once you have that sleeve in place, you can remove the bodice piece and cut the sleeve. You’ll get a nice mirrored look at the front armhole seam now.

You can use this same trick on any seam where you want to mirror the plaid! I did the same thing to match the plaids at the side seams.



Sew your garment together as usual, but take special care to align the stripes while sewing.

It can be helpful to hand baste areas with matching stripes before sewing the final seam, to prevent seams from shifting. Often, pins aren’t enough to keep things perfectly on track, especially with curves.

That’s it! Make sure to cut other pieces like the midriff with the new grainlines you drew in, and you are all set. That wasn’t so hard, was it?


Sarai Mitnick


Sarai started Colette back in 2009. She believes the primary role of a business should be to help people. She loves good books, sewing with wool, her charming cats, working in her garden, and eating salsa.



October 29, 2014 #

This is great thank you! I’m getting my fabric purchased today – do you think a wool flannel would be too thick, there seems to be lots of gathers? I really want to use it for the warmth factor…


October 29, 2014 #

This dress is actually a light wool flannel! It really just depends on how heavy it is. Try bunching some up in your hand to simulate gathers.

You can also use a different fabric for the inner yoke to reduce thickness.

gabriel ratchet

October 29, 2014 #

love that stack of fabric. another point when purchasing…. it’s much much easier to match a plaid that is woven, since the grain lines will be plaid lines by definition…. sometimes the plaid is printed onto the fabric, forcing you into a choice between the grain of the fabric and the line of the print.

once upon a time, my darling daughter fell in love with a printed plaid, and i tore my hair out try to match that plaid, instead of using the proper grain line. the dress never did hang properly…. the side seams would skew and the hem was wonky as all get out.


October 29, 2014 #

This. Is. Amazing.


October 29, 2014 #

This dress makes me dreamy… I just can’t find the strength to take the step to start sewing it for myself, it is so scary. It is all about accepting who we are I guess….


October 29, 2014 #

Awesome tutorial! My cousin was asking me how to do this – she’s just learning to sew – and I was having a hard time explaining it to her via text. I WILL be sending this to her.

Alice Elliot

October 29, 2014 #

I am an experienced sewist and still, the last plaid garment I made, just last week, I forgot to center the plaid on the fold of the fabric and the center back seam of the jacket is completely wack. I don’t have to look at it, but it’ll be kind of embarrassing if any of my fellow seamstress friends get a look at it!!! All plaids match at sleeves, pockets, center front and back going around, then the back is all off center. Oh well……Thanks for the tutorial, I’ll never forget again <;~)

Andrea Rebholz

October 29, 2014 #

When cutting a piece on the bias like the Dahlia’s midriff, do you add interfacing to prevent it from stretching?


October 29, 2014 #

You can, but I allow it to stretch. It’s quite comfortable that way, and the seams on either side prevent it from stretching too much. I have had a few vintage garments that are cut in a similar way.

Alternately, you could cut the inner waist yoke on the straight grain rather than using interfacing (and thereby adding more bulk).


October 30, 2014 #

Ah, that’s good to know! Would you stay-stitch the bias pieces before you sew them in?


October 29, 2014 #

I bought this pattern and want to make this dress in plaid fabric. Do you think medium weight wool flannel will be suitable or light weight wool flannel will be better because of the gathers?
I also want to make my own bias binding by using your tutorial. How do I choose fabric for the binding? Does it have to be of the same weight as the main fabric, for example light weight cotton for light weight wool flannel and medium weight cotton for medium weight wool flannel?


October 29, 2014 #

I’d go with something light. It’s a little subjective, though, what terms like “light” and “medium” mean, though! Try bunching some fabric up in your hand to get a feel for the gathers.

With bias tape, you want to keep bulk to a minimum because there are so many layers of fabric. Don’t go too heavy with it, because you’ll be sewing through about five layers and that will be tricky with such a narrow finish.


October 29, 2014 #

That fabric is AMAZING and exactly what I was picturing in my head for this dress. Where did you find it?


October 29, 2014 #

I bought it at Mill End here in Portland.


October 30, 2014 #

Beautiful dress. Lovely pics. Yum. I am expecting my pattern very soon and thanks to this am inspired to make my first one in grey checked cotton flannel – actually, a double quilt cover my sis gave me from Zara Home:). I used to love flannel sheets but no more since I got my merino electric blanket and down quilt. So I immediately earmarked the quilt for dresses:).
I actually bought a piece of find wool gabardine with super 120s which falls beautifully for Dahlia yesterday – but you have made me change to my quilt!

hannah frost

October 30, 2014 #

I will certainly be coming back to this post! I always struggle with pattern matching sleeves!

Jet Set Sewing

October 30, 2014 #

Those are all good tips, and matching is well worth the effort. I also like Susan Khalje’s tip of using double pins (connected pins with two parallel tips, used in quilting) to stabilize the matching in the fabric while you’re sewing it. It works like a charm!


October 30, 2014 #

Good tip, Julie! I use those forked pins for matching up seam joins all the time, totally makes sense for stripes and plaids too.


October 30, 2014 #

Love this pattern, hoping, pretending that I will join in on the sew along next week. Question – is it crazy to think of trying to line a version 1? I want to make a cold weather suitable version, and am wondering whether the suggested wool crepe or wool suiting might be itchy??


October 31, 2014 #

You can definitely line it, or even underline it to make things easier. Or, if you don’t want to do that, you could also wear a slip.


November 1, 2014 #



November 10, 2014 #

I just love how these patterns transform a plain piece of fabric into something that is
beautiful and fits! Thank you!